Fire Doors

Safety you can rely on

Thanks to extensive experience in the security industry, the Velletrani is able to offer a complete range of fire doors by the innovative technology, meeting the latest safety and operating parameters.

The production makes use of modern plants using the most advanced construction technology, this allows a standard of high and constant quality over time. All doors are HOMOLOGATED in compliance with the Ministerial Decree June 21, 2004, provided of documentation in force of the law, according to the requirements of the European standards.

Fire tests according to UNI9723 and EN 1634-1



The metal fire doors - blind and glazed – made by galvanized steel and epoxy powder coated in standard RAL. The frames are made by considerable strength profiles, good for large doors or in case of application on flimsy walls. Certified and approved under the following classifications for application on masonry or plasterboard walls and fixing with clamps, dowels or subframe:

UNI 9723 for single leaf - UNI 9723, for single and double leafs - UNI 9723, for single and double leafs

  • Frames
    Remarkably strong, adaptable to all types of walls, possibility to choose between different fixing systems, homologation for multiple applications to different types of wall, wide range of accessories.
  • Leafs
    Made by galvanized sheet steel hot, "SENDZIMIR", bended and welded; Perimeter rebated on 3 sides, flat bottom; Internal reinforcements in hot galvanized profile, insulated pack made with mineral wool treated and rigidly coupled to the plate; inner plates for possible mounting of door closers and handles. Single thickness of 60 mmm.
  • Standard frames
    Rugged and remarkable section;
    Made of galvanized sheet steel, "SENDZIMIR";
    Equipped with special brackets for assembly on site;
    Locations for intumescent and weather stripping;
    Standard fixing with anchors (except for the door to door REI 30), if required;
    Fixing with screws or plugs on the subframe.
    Lower spacer as assembly template;
    Support on finished floor without batting;
    Black nylon PA6 matching system for lock and latch bolts;
  • Intumescent seals
    Mounted on the perimeter of the frame profile and on the central profile of double doors;
    Mounted above and below the leafs according to the certification;
  • Hinges
    Nr. 02 three-wings hinges, for each leaf
    One load-bearing hinge with ball-bearing and screws for the vertical registration, CE marked in accordance with EN 1935, classified by capacity up to 160 Kg.
    One hinge equipped with a spring for the leaf self-closing.
  • Rostrums
    Nr. 1 or 2 safety bolts applied from the hinge side;
  • Locks
    Reversible lock with bolt and center bolt - CE marked in compliance with EN 12209. Insert with patent key, prepared for European cylinder type.
  • Handles
    Handle for fire doors, in black nylon PA6 and steel core. Underplate in steel with cylinder hole; Coverplates in black nylon PA6; fixing screws and patent insert keys.
  • Positioning aid
    The standard 2-leafs doors provide the positioning aid RC / STD for the correct closing sequence of the doors. CE marking according to EN 1158;
  • Safety lock
    Flush-bolt type for the leaf passive self-locking; lever control for unlocking;
  • Upper coupling system for the passive leaf
    Device operated from the safety lock which detects into top striker, top striker in pressed steel with steel roller.
  • Lower coupling system for the passive leaf
    vertical rod with steel toe cap which detects into the lower striker, striker bottom (floor-mounted bushing) in black self-extinguishing nylon with end stop.
  • Plates marking
    metal plate with the port identification data, as provided by law.
  • Finish
    Standard coating with epoxy-polyester thermoset in an oven at 180 °, anti-scratch embossed surface.
Weight of DoorsClassKm/mq Wall hole
1 LeafREI 3029
1 LeafREI 6037
2 LeafsREI 6035
1 LeafREI 12042


gallery 00a
gallery 00b
gallery 00c
gallery 00d
gallery 01
gallery 02
gallery 03
gallery 04
gallery 05
gallery 06
gallery 08
gallery 09


If you would like to receive more information fill out the form,
or send us an email: or contact us at
+39 06 9369303 - +39 06 9369404

Velletrani Giorgio & FIgli

The company, under the leadership of Giorgio Velletrani and Mirko and Marzia, Giorgio’s son and daughter, developed, in its eighty years history, specialized and advanced processing techniques.

Newsletter Subscribe



© Copyright 2017 VELLETRANI GIORGIO E FIGLI Srl | Azienda Certificata: ISO 9001:2015 e UNI EN 1090 - 1:2012 | P.iva 07991741005 | Published by Studio Graphos